We already have retail at our counter located in, Pelican # 248-B Col. Granjas Modernas where we have a wide range of assorted hardware for your needs, such as:

They are manufactured in Flathead Phillips in phosphatic black finish.

MEASUREMENTS

We focus on counter so we quote in any amount

Contributions 35443535 42 108 120 Ext

mostrador@tormex.com and juancarlos@tormex.com

Pelicano 248-B Colony Farms Modern

For more information on other products see www.tormex.com

With entrance to cross and flat type boltdriver ab rope.

MEASUREMENTS

We focus on counter so we quote in any amount

Contributions 35443535 42 108 120 ext

mostrador@tormex.com and juancarlos@tormex.com

Pelicano 248-B colony Farms Modern

For more information on other products see www.tormex.com

Our  drywall self – drilling of the drill bit  are hexagonal head and handle in diameters 10, 12, and 14.

Our  drywall drill tip  are ideal for fixing corrugated sheet steel, insulated panels, plastic laminates, insulation their secondary or primary structural elements.

Our  drywall self – drilling  are designed to easily pierce the sheet and come in electrolytic galvanized finish.

We counter sales, so we provided in any quantity.

 

MEASUREMENTS

We focus on counter so we quote in any amount

Contributions 35443535 42 108 120 ext

mostrador@tormex.com and juancarlos@tormex.com

Pelicano 248-B colony Farms Modern

For more information on other products see www.tormex.com

It is used for wood and sometimes foil.

MEASUREMENTS

We focus on counter so we quote in any amount

Contributions 35443535 42 108 120 ext

mostrador@tormex.com and juancarlos@tormex.com

Pelicano 248-B colony Farms Modern

For more information on other products see www.tormex.com

With integrated input washer drill bit cross.

Our  Drywall self – drilling type K-Lathe (Lathe-K)  are Phillips head and have the following measures number 6, 8 and 10 in different lengths.

The Drywall K-Lath which have Tormex offers  drill tip and  are ideal for fixing thin laminated elements, such as are guttering, moldings, flashings, etc.

Our  Drywall self – drilling  have finished  Galvanized (Zintro)  3 microns. We focus on counter where sold in any number of pieces.

MEASUREMENTS

We focus on counter so we quote in any amount

Contributions 35443535 42 108 120 ext

mostrador@tormex.com and juancarlos@tormex.com

Pelicano 248-B colony Farms Modern

For more information on other products see www.tormex.com

Description of the article

ARTILLERY STUD
STUD ARROW
STUD MANIFULL
STUD WHEEL
STUD FARM WHEEL
STUD WHEEL EXTRA HEAVY
STUD WHEEL TOWING
CONE
TAPON CARTER
STOPPER tarraja
NUT HIGH SPRING
NUT ARTILLERY
NUT CAMPANA
NUT CAMPANA FLOATING
NUT CAPUCHON
NUT CASTLE
NUT CONICAL
NUT LUXURY

The harpoon is an anchor dowel fixings flush and through the object afijar .Once within gives puncture and give a torque, the expansion sleeve is mounted on the lower end cone, generating expansion pressure on the inner walls of drilling.

MEASUREMENTS

CIRCULAR AND CIRCULAR CUT WASHER

These washers are sold in black and electrolytic finish.

Measurements:

A = Clipped Edge   E =  must be no less than 7/8 “bolt diameter from the center of the washer.

B = 3/16. Nominal.

C = 1/4 in. Nominal.

A washer is a thin plate usually disc-shaped, with a hole generally in the center that is used to distribute the load of a bolt or a nut or also used as a separator.

ASTM F-436 WASHER WITH HARDNESS 38.0-45. HRC

These washers are sold in black and finished hot dip galvanizing and electroplating.

Measurements: 

Lockwashers is a hard disk with a hole the center, with an opening on one side in curved upwards and its function is to make pressure on the screw is not loosened. The washers are usually metal.

Head bolt high quality require some washers carbide to prevent loss of preload once the torque was applied. Hardness of 38-46 HRC.

These bolts are under the standard ASME-B18.2.1 DIMENSIONAL AND STANDARD MATERIAL SAE-J429

Measurements:

These bolts have them in UNF rope and rope UNC Grade 5 and Grade 8

In the following diameters and lengths:

We in counter with existence of the following measures hexagonal bolts UNF Grade 5 and UNC (thin rope and rope standard)  Diameters 1/4, 5/16, 3/8, 7/16 and long to 5 “.

In diameters greater than 1/2 “We also have manufacturing and inventory of various sizes.

Counter have immediate or 3 to 4 days maximum delivery delivery.

Bolts in fabrications above grade 5 1/2 “diameter we do not have stock offer 3 to 5 weeks.

We also UNS-threaded bolts 14 in 1 “, fine threads (Unified Fine) these threads are suitable when there is vibration, for example in automobiles and aircraft, since having lower pitch have a lower helix angle.

UNC threads (Unified Coarse), these threads are of large pitch and used in ordinary applications in which easy assembly and disassembly or frequent required.

These bolts are used for machine tools, vehicles, presses and lifting elements are as cranes.

 

 

 

These bolts are manufactured in the following grades: Grade 8 5- degree standard and thin rope 304 and 316 stainless steel.

Measurements:

Cylinder head bolts with hexagon socket, is used for bonding metal to provide great tightenings in narrow areas and facilitating the centering of the bonded parts, it is possible to hide the head, is practiced a cylindrical countersinking the hole.

These bolts are manufactured in the following qualities 10.9- 12.9 8.8- and 304 and 316 stainless steel.

Countersunk bolts with hexagon socket, is used for bonding metal parts to provide great tightenings in tight and easier to center delas parts to be joined, it is possible to hide the head

Bolts if practiced a conical countersinking the hole.

These lightweight nuts are under the standard ASME-B18.2.2 DIMENSIONAL AND STANDARD MATERIAL SAE-J995

Dimensions:

A nut is integral with a central hole, which has a thread, which must be adapted to a bolt fixed or sliding fit.

It allows fixing nut or clamping joints removable parts, sometimes you can put a washer to seal the union better and remain more fixed.

There are different types of degrees as required. Nuts are manufactured in large quantities and their processes are highly automated.

The nuts must have the same geometrical features of the bolt which will be assembled nuts usually tightened with spanner, adapted to the dimensions of its faces.

DIMENSIONS:  ASME – B18.2.2

SPECIFICATION:  SAE J-995

ROCKWELL HARDNESS HRC:  32.0 MAX

MATERIAL:  Low carbon steel.

BRAND:  SIN MARCA

ROPE:  UNC, UNF 2B ADJUSTMENT

LOAD TEST:  1/4 to 1-1 / 2 90.000 (PSI)

FINISHES:

& UNFINISHED blacken.

& Electroplating (ASTM B-633)

& Hot dip galvanized (ASTM 153)

& Tropicalized. (ASTM B-766)

THESE ARE UNDER THE STANDARD BOLTS ASME-B18.2.2 DIMENSIONAL AND STANDARD MATERIAL SAE-J995

Dimensions:

A nut is integral with a central hole, which has a thread, which must be adapted to a bolts fixedly or sliding nuts exhibit Grade 5 degree identifying marks.

Nut allows to attach or secure joints removable parts. Sometimes you can put a washer for the highest close union and remain more fixed.

They come in different types of degrees as required.

Nuts are manufactured in large quantities and their processes are highly automated.

The nuts must have the same geometrical features of the bolts which will be assembled

Usually nuts are tightened with spanner adapted to the dimensions of their faces.

And blued heat treated.

DIMENSIONS:  ASME – B18.2.2

SPECIFICATION:  SAE J-995

ROCKWELL HARDNESS HRC:  32.0 MAX

MATERIAL:  STEEL medium carbon.

BRAND:  POINT AND SEPARATE ARCH 120 ° circumference

ROPE:  UNC, UNF 2B ADJUSTMENT

LOAD TEST:  1/4 to 1-1 / 2 120.000 (PSI)

FINISHES:

& UNFINISHED blacken.

& Electroplating (ASTM B-633)

& Hot dip galvanized (ASTM 153)

& Tropicalized. (ASTM B-766)

In the early 30’s the industry generally faces the need for hardware capable

aflojante withstand the vibration effect giving rise to nuts Nylon insert.

These are metal locknuts standard and fine thread, have an insert

Nylon thread that holds them in place and prevents loosening

These rods have them in UNC String (standard) in Grade 2.

We also have different rod lengths as required cut it to size.

SPECIFICATION:                SAE J-429

MATERIAL:                          Low carbon steel

ROCKWELL HARDNESS B:       71 Minimum 95 Maximum

FINISHING:                           GALVANIZADO

THREADED:                           UNC at setting 6 ° g

The threaded rod is used to hold two pieces in a fixed position, screwing one side and its tip pressed on another.

The ends of clamping may be slotted or hexagon (Allen).

We can also handle larger diameters on request from 2 to 3 business days.

WhatsApp Envíanos un whatsapp